Complete Set, 1910 Coil Stamps Perf 12 Vertically

# 387-88 - Complete Set, 1910 Coil Stamps Perf 12 Vertically

$2,895.00
(No reviews yet) Write a Review
Image Condition Price Qty
909547
Mint Stamp(s) Usually ships within 60 days. Usually ships within 60 days.
$ 2,895.00
$ 2,895.00
0
Mounts - Click Here
Mount Price Qty

 

Are You Missing These 1910 Washington-Franklin Coils?
Single Line Watermark, Perforated 12 Vertically

The Washington-Franklins are among the most fascinating and challenging US stamps to collect.  Issued between 1908 and 1922, they encompassed over 200 varieties, five different designs, two paper types, three printing methods, at least 14 perforations, several colors, and 20 denominations. 

You can come one step closer to completing your Washington-Franklin collection with this convenient set of two stamps.  Each of these coil stamps was printed on single line watermark paper and perforated 12 vertically.  They were the result of an ingenious new method for making coils…

A Revolution in Coils

By 1910, the Bureau found itself producing coiled stamps by the millions. As demand for coils increased, it became apparent that a more efficient and economical means of manufacturing them was needed.

With the old method, sheets of 400 stamps were perforated in one direction and then cut in half. These sheets were then put into a “stripper” and cut into strips of twenty stamps. Workers would then hand-assemble the strips into coils of 500 or 1000. This system required “paste-ups,” in which one strip of twenty had to be glued to another until 25 or 50 strips (depending on whether the coil was to have 500 or 1000 stamps) had been attached. These long, continuous strips were then wound into rolls for use in the vending machines.

Eventually, it was determined that an enormous amount of time could be saved if the sheets were pasted together before being cut into strips. Thus, only one paste-up would be necessary, as opposed to twenty. Because the stripping machines were not equipped to cut through double the amount of paper every twenty stamps, J.E. Ralph designed a new machine.

Designed with stronger cutting wheels, capable of slicing the paper joints, the new machine not only cut the sheets into strips, but also wound the rows into coiled rolls. This invention, in addition to cutting down the time needed to produce coils, also reduced the number of workers by nearly 90 percent! Instead of requiring seventeen workers, as the previous hand-assembling method did, the new machine only needed two operators.

 

 

Read More - Click Here

 

Are You Missing These 1910 Washington-Franklin Coils?
Single Line Watermark, Perforated 12 Vertically

The Washington-Franklins are among the most fascinating and challenging US stamps to collect.  Issued between 1908 and 1922, they encompassed over 200 varieties, five different designs, two paper types, three printing methods, at least 14 perforations, several colors, and 20 denominations. 

You can come one step closer to completing your Washington-Franklin collection with this convenient set of two stamps.  Each of these coil stamps was printed on single line watermark paper and perforated 12 vertically.  They were the result of an ingenious new method for making coils…

A Revolution in Coils

By 1910, the Bureau found itself producing coiled stamps by the millions. As demand for coils increased, it became apparent that a more efficient and economical means of manufacturing them was needed.

With the old method, sheets of 400 stamps were perforated in one direction and then cut in half. These sheets were then put into a “stripper” and cut into strips of twenty stamps. Workers would then hand-assemble the strips into coils of 500 or 1000. This system required “paste-ups,” in which one strip of twenty had to be glued to another until 25 or 50 strips (depending on whether the coil was to have 500 or 1000 stamps) had been attached. These long, continuous strips were then wound into rolls for use in the vending machines.

Eventually, it was determined that an enormous amount of time could be saved if the sheets were pasted together before being cut into strips. Thus, only one paste-up would be necessary, as opposed to twenty. Because the stripping machines were not equipped to cut through double the amount of paper every twenty stamps, J.E. Ralph designed a new machine.

Designed with stronger cutting wheels, capable of slicing the paper joints, the new machine not only cut the sheets into strips, but also wound the rows into coiled rolls. This invention, in addition to cutting down the time needed to produce coils, also reduced the number of workers by nearly 90 percent! Instead of requiring seventeen workers, as the previous hand-assembling method did, the new machine only needed two operators.